LFP Sitemap

• Under Construction
  index.html
• Laminar Flow Pumps and Low Cost Drying
  Industrial Drying & Material Handling Doesn’t Need to Cost the Earth - L F Pumping (Europe) Ltd operates the LamiFloTM Drying & Material Handling System - the most innovative, environmentally friendly, economic and efficient bespoke drying and material handling solution available.
  laminar-flow-pumps-and-low-cost-drying.php
• LF Pumping Services
  Cost effective, carbon efficient drying and materials handling at a fraction of the cost of traditional systems. LF Pumping (Europe) Ltd introduces the most innovative, environmentally friendly, economic, and clean drying, material handling, pumping & crushing system. We provide complete custom designed solutions for a vast array of market sectors from the construction industry to pharmaceutical industry, food production to biomass processing, forestry commission to power generation, and more.
  lf-pumping-services.php
• Technology Overview
  Overview of the LamiFlo™ drying, material handling, crushing and pumping system
  technology-overview.php

• The Anudros Chamber
  The Anudros™ Chamber is a patented mixing chamber which combines the moist product from the variable speed Archimedes Screw with the incoming low pressure air, and transports this mixture into the integral linear acceleration chamber. The discharge nozzle at the end of the Anudros™ Chamber attached to the product transport line.
  the-anudros-chamber.php
• Lamiflo Diagrams
  Diagramatic drawing of te Lamiflo ssytem
  lamiflo-diagrams.php

• Enquiry Form
  How to contact us. Placce an enquiry
  enquiry.php

• General Drying
  Drying materials by removing or reducing moisture content by its very nature can be a costly, resource intensive, slow, and a high carbon emitting process. Fluidized bed and rotary drum drying systems for Sand, Gravel, Potash, Gravel, Rock, Coal, Glass, Minerals, Limestone, Flyash, Bottom ash, Slag, Trona, China Clay, Chalk, Lime, Wood chippings, biomass and all Aggregates, demand high levels of natural resources such as oil, gas, gasoil, or LPG, to thermally dry these materials. The more moisture content that needs to be driven off, the higher the energy cost, the more damaging to the environment.
  general-drying.php
• Sand Drying
  Sand Drying with the LamiFloTM Sand Dryer costs less than $1 per tonne, and less than 5Kg of CO2 per processed tonne. L F Pumping (Europe) Ltd offers the most cost effective, and clean alternative to sand drying. Sand is used in a wide range of market sectors, and industries, throughout the world, and in many situations the moisture content needs to be accurately and precisely controlled, to ensure high quality finishes of product. With the fluctuations in price for natural resources used in traditional methods of drying, it is impossible to control costs and therefore prices for this important process.
  sand-drying.php
• Chalk Fines Drying
  Calcium, Gypsum, Lime & Chalk Drying with the LamiFloTM Sand Dryer Costs Less Than $1 per Tonne to Run, and Produces Less Than 5Kg of CO2 per Processed Tonne ...... The LamiFloTM Dryer & Material Handling System offers the most cost effective, sustainable and clean alternative for drying of gypsum, lime, chalk, calcium sulphate & calcium sulphite, reducing significantly the carbon emissions and running costs compared to any traditional drying methods.
  chalk-fines-drying.php
• Coal Drying
  In the UK nearly 40% of power generation is derived from coal based power stations. There are various process’ of generation of power from coal, however the key question is how much energy is gained from the process, and how to maximise this amount of energy being released. This is generally termed Nett Calorific Value or Lower Heating Value, it is the heat energy available after reducing the loss due to moisture content. Generally the drier the coal, the higher the calorific value the lower, the amount of the coal required to generate a unit of Electricity.
  coal-drying.php
• Crushed Glass Drying
  Drying of Crushed Recycled Glass with the LamiFloTM Glass Dryer Costs Less Than $0.50 per Tonne to Run, and Produces Less Than 2Kg of CO2 per Processed Tonne ...... The LamiFloTM Crushed Glass Dryer & Material Handling System offers the most cost effective, sustainable and clean alternative for drying and material handling of crushed or powdered glass. The revolutionary design of the LamiFloTM Dryer enables unrivalled low maintenance, low running cost, and low carbon emissions for drying and material handling of powdered or crushed glass.
  crushed-glass-drying.php
• Quarry Fines & Waste Drying
  quarry-fines-&-waste-drying.php
• Biomass and Wood Chips
  Biomass & Wood Chip, Pellets & Shavings Drying - With Fossil fuel prices set to increase by at least 50% over the next 5 years, and an increased awareness and attention of the environment, has driven rapid development of green or clean renewable energy generation. Biomass & Wood is taking a primary alternative source of energy generation. Whether the biomass or wood is pelleted, chipped or process into shavings, the LamiFlo™ Drying systems offers a cost effective, and clean alternative to drying.
  biomass-and-wood-chips.php
• Mobile Contract Drying and Material Handling Service
  we now offer a mobile contract drying and material handling service. The LamiFlo drying units are vehicle mounted, therefore access to any site with a drying unit, is now achievable.
  mobile-contract-drying-and-material-handling-service.php

• Trailer
  LF Pumping mobile material handling and drying trailer mounted platform
  trailer.php

• Material Handling
  Successful crushing, pumping, drying, transporting and grading of materials ranging from 2 microns up to 75mm diameter. LamiFlow Equipment may be used for crushing, drying, transporting and grading of materials including:- Aluminium (Chips & Flakes); Animal Feeds Dry, Moist, Pellets, cakes, & slurry; Asbestos Shredded; Ash (Coal); Bentonite Carbon Powder and Pellets ........
  material-handling.php
• Air Classification
  Air classification has yet to be taken up in any significant way by the UK aggregates industry. It is used by some aggregate companies, for the production of higher-value industrial mineral products, such as mineral fillers, dry silo mortar and cement. This is particularly the case with limestone quarries and a few sandstone quarries. However, the higher value of these products enables the use of higher-cost processing options.
  air-classification.php
• FAQ
  frequently asked questions about laminar flow pumping and drying systems.
  faq.php
• Materials Handling News
  International materials handling news
  materials-handling-news.php
• Partners and Resources
  A list of our partners and useful resources
  partners-and-resources.php
• LFP Comments Forum
  LFP Comments Forum - We have established this comment forum to help visitors and to set up the ability for our visitors to contribute ideas and experiences that will be of benefit to others. You can use this too for general questions which other visitors may be able to answer.
  lfp-comments-forum.php
• Downloads
  Please download our free brochure about our unique laminar flow pumping technology for drying and material handling.
  downloads.php
• About Us
  About us - L F Pumping (Europe) Ltd
  about-us.php
• Contact us
  Contact us using the emails below
  contact-us.php
• Privacy
  Our privacy policy
  privacy.php
• Site Map
  sitemap.php
• Blog
  Our laminar flow pumping and materials handling and drying blog